Generating FDM-Managed Device Executive Summary Reports
Security Cloud Control provides several reports that you can use to analyze the impact of your security policies on the traffic going through your FDM-managed devices. An Executive Summary Report summarizes the most impactful malware, threats, and impacted security intelligence. Security Cloud Control polls devices every hour to collect events. To learn more about what the executive summary offers, see FDM-Managed Device Executive Summary Report.
Important | The FDM-managed device reports are available only on the FDM-managed device that is currently onboarded to your tenant. These reports are generated hourly and are not part of the request for events. So events and reports are not available at the same cadence. After initially onboarding your FDM-managed device, Security Cloud Control may take up to two hours to generate reports. Until there are reports to display, the Reports tab under the Analytics option will not be visible. |
If you are a Security Analytics and Logging subscriber, Network Reports do not reflect the events forwarded to the Secure Event Connector (SEC).
Note | The data used in traffic-related reports is collected from events triggered by access control rules and other security policies. The generated report does not show traffic for rules in which logging is not enabled, or rules that have not been triggered. Ensure that you configure your rules with the information that matters to you. |
The following procedure shows how to generate an Executive Summary Report:
Procedure
Step 1 | In the navigation pane, click . |
Step 2 | Select the time range for the reports—24 Hours, 7 Dayss, 30 Days, or 90 Days. |
Step 3 | (Optional) Click the filter ( |
Step 4 | Click Generate Report (PDF). |
Step 5 | To save the report as a PDF, click Save and choose Save as PDF in the Destination drop-down. |
Step 6 | Browse to the location in which you want to save the report, and click Save. If you do not want to save the report, click Cancel at any time. |
) icon to select a custom list of devices, for which to generate a report.