Upload File to Multiple ASA Devices

Use this procedure to upload a file to multiple ASA devices at the same time.

Procedure

Step 1

In the left pane, click Security Devices.

Step 2

Click the Devices tab.

Step 3

Click the ASA tab and select multiple ASA devices to perform a bulk upload.

Step 4

In the Device Actions pane on the right, click Upload File. Note: The Upload File link appears if ASA devices are online.

Step 5

In the URL link, specify the server's paths where the file is pre-uploaded. The Destination Path field shows the name of the file that is being uploaded to the disk0 directory. If you want to upload the file to a specific directory within disk0, specify its name in this field. For example, if you're going to upload a dap.xml file to the "DAPFiles" directory, specify "disk0:/DAPFiles/dap.xml" in the field.

Note

You can view the directories present in the disk0 folder by executing the dir command in the Security Cloud Control ASA CLI interface.

Step 6

If the specified server path points to an AnyConnect file, the Associate file with RA VPN Configuration check box is enabled.

Note

This check box is enabled only for an AnyConnect file name that follows the right naming convention, which is 'anyconnect-win-xxx.pkg', 'anyconnect-linux-xxx.pkg', or 'anyconnect-mac-xxx.pkg' format. On selecting this check box, Security Cloud Control associates the AnyConnect file to the RA VPN configuration on the selected ASA devices after a successful upload.

Step 7

Click Upload.

Step 8

If you have chosen to associate the AnyConnect package with the RA VPN configuration in step 4, deploy the new RA VPN configuration to ASA devices.

What to do next

You can view the progress of uploading the file on individual devices. Select the ASA device, and in the Management pane on the right, click File Management. If the file upload is in progress, wait for the operation to complete.

You don't have to deploy the configuration changes on the device.`