Work with Bulk Command History

After you send a bulk CLI command, Security Cloud Control records that command in the Bulk CLI page history page. You can rerun the commands saved in the history pane or use the commands as a template. The commands in the history pane are associated with the original devices on which they were run.

Procedure

Step 1

In the navigation pane, click Security Devices.

Step 2

Click the Devices tab to locate devices.

Step 3

Click the appropriate device type tab and click the filter icon to find the devies you want to configure.

Step 4

Select the devices.

Step 5

Click Command Line Interface.

Step 6

Select the command in the History pane that you want to modify or resend. Note that the command you pick is associated with specific devices and not necessarily the ones you chose in the first step.

Step 7

Look at the My List tab to make sure the command you intend to send will be sent to the devices you expect.

Step 8

Edit the command in the command pane and click Send. Security Cloud Control displays the results of the command in the response pane.

Note	A command will succeed on selected ASA devices that are synced and may fail on devices that are not synced. If any of the selected ASA devices are not synced, only the following commands are allowed: `show, ping, traceroute, vpn-sessiondb, changeto, dir, write, and copy`.