Configure or Modify Device Specific System Settings

A device-specific system settings are existing values specific to an ASA device that can be modified using Security Cloud Control. You can override the shared system settings policy values with existing device-specific values for parameters you want.

This topic describes configuring an onboarded ASA device's system settings.

Procedure


Step 1

In the left pane, click Security Devices.

Step 2

Click the ASA tab.

Step 3

Select the ASA device you want and in the Management pane on the right, click Settings.

You will see the device-specific system settings of the selected ASA device.

Note

If the selected device is assigned with a shared system settings policy, the Parent Policy provides a link to open the policy. You can also assign a policy from the device-specific settings page. Select the ASA devices you want to associate with the selected policy and click OK

Step 4

Configure or modify the values of the system settings you want and click Save.

Note

The field descriptions for a shared and device-specific system settings remain the same. You can click the corresponding link below for more information.

You can click Return to Security Devices to navigate to the Security Devices page.

Step 5

Click Save after making the changes.

Note

An orange dot () on the corresponding parameter highlights unsaved changes.