Deploy to Device by Script

Step 1

Navigate to the Devices tab and click the Devices tab.

Step 2

Click the appropriate device type tab and select your modified device from the table. Configuration status should show Not Synced, indicating that it has changes that have not yet been applied to the device.

Step 3

Click Sync from the right sidebar to generate the commands that will be applied to the device to bring it into a synced status with the CDO configuration.

Step 4

When prompted, click Download Commands to download a copy of the commands locally. These commands will be contained in a text file and can be reviewed before being applied. Commands will also be generated to revert the changes if desired.

Step 5

Outside of CDO, log onto the device using a standard protocol, and apply the commands that were downloaded.

Step 6

Once all commands have been entered, return to CDO and again select the modified device on the Devices tab.

Step 7

Click Refresh to confirm synchronization with CDO.