Remove SEC files from the SDC

This is the second part of a two part procedure to remove the Secure Event Connector from your SDC. See Remove the Secure Event Connector before you begin.

Procedure


Step 1

Open your virtual machine hypervisor and start a console session for your SDC.

Step 2

Switch to the SDC user.

 [cdo@tenant toolkit]$sudo su sdc 

Step 3

At the prompt type one of these commands:

  • If you are managing only your own tenant:

    [sdc@tenant toolkit]$ /usr/local/cdo/toolkit/sec.sh remove
  • If you manage more than one tenant, add CDO_ to the beginning of the tenant name. For example:

     [sdc@tenant toolkit]$ /usr/local/cdo/toolkit/sec.sh remove CDO_[tenant_name] 

Step 4

Confirm your intention to remove the SEC files.