Create a Zoom connector

Create a Zoom connector that sends data to the Security Cloud Control for use in policies.

The IP addresses associated with these tags are maintained by Zoom. You do not have to create a dynamic attributes filters.

For more information, see Zoom network firewall or proxy server settings.

Procedure

Step 1

Log in to Security Cloud Control.

Step 2

Click Firewall.

Step 3

Click Administration > Dynamic Attributes Connector > Connectors.

Step 4

Do any of the following:

  • Add a new connector: click Add icon (add icon), then click the name of the connector.

  • Edit a connector: click Edit icon (edit icon).

  • Delete a connector: click Delete icon (delete icon).

Step 5

Enter this information.

Value

Description

Name

(Required.) Enter a name to uniquely identify this connector.

Description

Optional description.

Pull Interval

(Default 30 seconds.) Interval at which IP mappings are retrieved from Zoom.

The minimum value for Pull Interval is 1 second. You can set the maximum to any value you want. We recommend against setting the minimum to a low value because it can generate a lot of traffic, and, when applicable, can result in your being billed for the traffic.

Provider Reserved IPs

(Required.) Slide to enabled to retrieve any reserved IP addresses.

  1. Click Test and make sure the test succeeds before you save the connector.

  2. Click Save.

    The Status column displays Ok.