Using the Command Line Interface

Procedure

Step 1

In the left pane, click Security Devices.

Step 2

Click the Devices tab.

Step 3

Use the device tabs and filter button to find the device you want to manage using the command line interface (CLI).

Step 4

Select the device.

Step 5

In the Device Actions pane, click >_Command Line Interface.

Step 6

Click the Command Line Interface tab.

Step 7

Enter your command, or commands, in the command pane and click Send. The device's response to the command(s) are displayed below in the "response pane."

Note

If there are limitations on the commands you can run, those limitations are listed above the command pane.