Schedule Polling for Device Changes
If you have Conflict Detection enabled, or if you Enable the option to auto-accept device changes from the Settings page,Security Cloud Control polls the device for the default interval to determine if a change has been made to the device's configuration outside of Security Cloud Control. You can customize how often Security Cloud Control polls for changes per device. These changes can be applied to more than one device.
If there is no selection configured for a device, the interval is automatically configured for "tenant default".
Note | Customizing the interval per device from the Security Devices page overrides the polling interval selected as the Default Conflict Detection Interval from the General Settings page. |
After you enable Conflict Detection from the Security Devices page or Enable the option to auto-accept device changes from the Settings page, use the following procedure to schedule how often you want Security Cloud Control to poll your devices:
Procedure
Step 1 | In the left pane, click . |
Step 2 | Click the Devices tab to locate your device. |
Step 3 | Click the appropriate device type tab. |
Step 4 | Select the device or devices for which you want to enable conflict detection. |
Step 5 | In the same area as Conflict Detection, click the drop-down menu for Check every and select the desired polling interval: |