Manage the Network Module for the Secure Firewall 3100

If you install a network module before you first power on the device, no action is required; the network module is enabled and ready for use.

To view physical interface details for the device, and to manage the network module, open the Chassis Operations page. From Devices > Device Management, click Manage in the Chassis column. For clustering or High Availability, this option is only available for the control node/active unit. The Chassis Operations page opens for the device.

Click Refresh to refresh interface status. Click Sync Modules if you made a hardware change on the device that you need to detect.

If you need to make changes to your network module installation after initial bootup, then see the following procedures.