Implementing Secure Logging Analytics (SaaS) for FDM-Managed Devices
Before you Begin
-
Review Secure Logging Analytics for FDM-Managed Devices to learn about:
-
How events are sent to the Cisco cloud
-
Applications in the solution
-
Licenses you need
-
Data plan you need
-
-
You have contacted your managed service provider or Security Cloud Control Sales representative and you have a Security Cloud Control tenant.
-
Your tenant may or may not use an Secure Device Connector (SDC) for Security Cloud Control to connect with your FDM-managed devices. Your tenant should have an SDC installed for those FDM-managed devices that you onboard with device credentials, it is considered a best practice. If you onboard your FDM-managed devices with registration key or serial number you do not need an SDC.
-
If you have installed an SDC for your tenant, ensure your SDC status is Active and has recorded a recent heartbeat.
-
If you are installing an SDC, you use one of these methods for the installation:
-
Use Deploy a secure device connector using Security Cloud Control's vm image to install an SDC using Security Cloud Control's prepared VM image. This is the preferred and easiest way to deploy an SDC.
-
-
You can install more than one SEC for your tenant and you can send events from any Firewall device manager to any one SEC onboarded to your tenant.
-
If you are sending events directly to the Cisco cloud from the firewall device manager, you have opened up outbound access on port 443 on the management interface.
-
You have established two-factor authentication for users of your account.
New Security Cloud Control Customer Workflow to Implement Secure Logging Analytics (Saas) and Send Events through the Secure Event Connector to the Cisco Cloud
-
Onboard your FDM-Managed Devices. You can onboard the device with the admin username and password or with a registration token.
-
Create a Syslog Server Object for Secure Logging Analytics (SaaS).
-
Configure the FDM-Managed Device Policy to log connection events.
-
Configure your FDM-managed device to Send events generated by rules and policies to the Secure Event Connector.
-
Confirm events are visible in Security Cloud Control. From the navigation bar, select . Click the Live tab to view live events.
-
If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, continue with Analyzing Events in Cisco Secure Cloud Analytics.
New Security Cloud Control Customer Workflow to Implement Secure Logging Analytics (SaaS) and Send Events Directly to the Cisco Cloud
-
Onboard your FDM-Managed Devices. You can only use a registration key.
-
Configure the FDM-Managed Device Policy to log connection events.
-
Configure your FDM-managed device to send events directly to the Cisco cloud.
-
Confirm events are visible in Security Cloud Control. From the navigation bar, select . Click the Live tab to view live events.
-
If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, continue with Analyzing Events in Cisco Secure Cloud Analytics.
Existing Security Cloud Control Customer Workflow to Implement Secure Logging Analytics (SaaS) and Send Events through the Secure Event Connector to the Cisco Cloud
-
Onboard your FDM-Managed Devices. You can onboard the device with the admin username and password or with a registration token.
-
Configure the FDM-Managed Device Policy to log connection events.
-
Send events generated by rules and policies to the Secure Event Connector.
-
Confirm events are visible in Security Cloud Control. From the navigation bar, select . Click the Live tab to view live events.
-
If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, continue with Analyzing Events in Cisco Secure Cloud Analytics.
Existing Security Cloud Control Customer Workflow to Implement Secure Logging Analytics (SaaS) and Send Events Directly to the Cisco Cloud
-
Onboard your FDM-Managed Devices. You can only use a registration key.
-
Configure the FDM-Managed Device Policy to log connection events.
-
Configure your FDM-managed device to send events directly to the Cisco cloud.
-
Confirm events are visible in Security Cloud Control. From the navigation bar, select . Click the Live tab to view live events.
-
If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, continue with Analyzing Events in Cisco Secure Cloud Analytics.
Analyzing Events in Cisco Secure Cloud Analytics
If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, perform the following in addition to the previous steps:
-
Deploy one or more Secure Cloud Analytics sensors to your internal network if you purchased a Total Network and Monitoring license. See Cisco Secure Cloud Analytics Sensor Deployment for Total Network Analytics and Reporting.
-
Invite users to create Secure Cloud Analytics user accounts, tied to their Cisco Single Sign-On credentials. See Viewing Cisco Secure Cloud Analytics Alerts from Security Cloud Control.
-
Cross-launch from Security Cloud Control to Secure Cloud Analytics to monitor the Secure Cloud Analytics alerts generated from firewall device manager events. See Viewing Cisco Secure Cloud Analytics Alerts from Security Cloud Control.
Reviewing Secure Cloud Analytics Alerts by Cross-launching from Security Cloud Control
With a Logging Analytics and Detection or Total Network Analytics and Monitoring license, you can cross-launch from Security Cloud Control to Secure Cloud Analytics to review the alerts generated by Secure Cloud Analytics, based on firewall device manager events.
Review these articles for more information:
Secure Analytics and Logging (SaaS) Workflows
Troubleshooting Using Security and Analytics Logging Events describes using the events generated from Secure Logging Analytics (SaaS) to determine why a user can't access a network resource.
See also Working with Alerts Based on FDM Events.